Water heater hot water is not much, slow to boil water? The common electric water heater will appear this kind of shortcoming after using for as long as one or two years. The water is often not hot after half a day's operation, or the hot water will be gone before the bath is finished. Can you clearly buy a large number of liters of water heater? What is the problem?
In fact, this is mostly due to the problem caused by the scale inside the electric water heater. After a long time of using the kettle in our house, we will find that there is a thick layer of oxide at the bottom, which is formed after the water is heated.
The working principle of the water heater is the same as that of the electric kettle. Therefore, after long-term use, the scale will also form and cannot be removed. All of them are deposited in the inner tank, which will naturally affect the heating effect and hot water volume of the water heater. So how can we get these dirty things out?
First, disconnect the power supply, turn off the water valve, and then turn on the hot water valve and cold water valve of the water heater together, and then drain all the water inside. Then, you can see that the water quality is very poor with impurities.
The next step is to open the top cover of the water heater. The detailed operation depends on the structure of your electric water heater. After you open the cover, you can see the scale inside the water heater, layer by layer, layer by layer. It looks disgusting.
Seeing this, you know why there is so little water coming out of your water heater. The long-term sewage inside will also affect your skin health. The reason why the water normally discharged looks clean is that the scale is deposited under the water outlet of the water heater and will not be swept away with the water.
After the scale has been removed, replace the magnesium rod, heating pad and heater with new ones, so that the water heater can resume the function of rapid heating.
Source: Jiangmen magnetic energy water heater http://www.konryt.com/
What causes the trip of Jiangmen storage type magnetic energy electric water heater
The sudden trip of electric water heater during heating is mainly due to the following reasons: firstly, the heating pipe and temperature sensitive switch probe conduct heat directly through the metal. If the heat conduction is too fast or too high, it will cause problems. At this point, it may be necessary to replace it. Secondly, the insulation function of the heating tube is reduced, so its insulation resistance is unstable. When the leakage current exceeds a certain value, it will act on the
How to clean Jiangmen magnetic energy water heater
Many people's water heaters have been used for a long time, and the water heaters have become very dirty, especially in the places we can't see inside. The reason is that a lot of scale has been accumulated in the water heater since it was used, and there is no active design to clean the scale. Therefore, we need to clean the water heater regularly. If you can't clean the water heater, let it Let me teach you. The first step is to cut off the power supply of the water heater, then close the two
Jiangmen magnetic energy water heater tells you the reason why the water heater runs slowly
Water heater hot water is not much, slow to boil water? The common electric water heater will appear this kind of shortcoming after using for as long as one or two years. The water is often not hot after half a day's operation, or the hot water will be gone before the bath is finished. Can you clearly buy a large number of liters of water heater? What is the problem? In fact, this is mostly due to the problem caused by the scale inside the electric water heater. After a long time of using the ke
The technique of removing the stain of Jiangmen magnetic energy water heater
As we all know, after a long time of use, all electric appliances that use electric heating tubes to heat water, such as electric water heaters, electric kettle, etc., simply produce scale and dirt on the surface of the electric heating tubes, and then reduce the heat exchange efficiency. If you can't take it out in time, it will not only waste the electric energy, but also shorten the life of the heating pipe due to poor heat conduction of the heating pipe, and even damage it due to overheating